04-07 Dodge Dakota Durango Ram Jeep 4.7L SOHC Master Overhaul Engine Rebuild Kit

Description

Applications
Year
Make
Model
Engine
2007
Chrysler
Aspen
4.7L 285CID V8 FLEX SOHC
Spec Note:
(16 Valve) VIN Code "P" - NGC Design
2007
Chrysler
Aspen
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
2007
Dodge
Dakota
4.7L 285CID V8 FLEX SOHC
Spec Note:
(16 Valve) VIN Code "P" - NGC Design
2004
Dodge
Dakota
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
05 - 07
Dodge
Dakota
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N, J" - NGC Design
06 - 07
Dodge
Durango
4.7L 285CID V8 FLEX SOHC
Spec Note:
(16 Valve) VIN Code "P" - NGC Design
04 - 07
Dodge
Durango
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
2007
Dodge
Ram 1500
4.7L 285CID V8 FLEX SOHC
Spec Note:
(16 Valve) VIN Code "P" - NGC Design
05 - 07
Dodge
Ram 1500
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
2004
Dodge
Ram 1500
4.7L 287CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
2007
Jeep
Commander
4.7L 285CID V8 FLEX SOHC
Spec Note:
(16 Valve) VIN Code "P" - NGC Design
06 - 07
Jeep
Commander
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
05 - 06
Jeep
Grand Cherokee
4.7L 285CID V8 SOHC
Spec Note:
(16 Valve) VIN Code "N" - NGC Design
Package Contents
Multi-Layered Steel head gasket
Intake manifold gasket
Exhaust manifold gasket
Valve cover gasket
Viton valve stem seals
Camshaft front
O-rings
Front Seal Gasket
Rear Seal Gasket
Water Pump Gasket
Timing Cover Gasket
Oil Pan Gasket
Other Small Gaskets
8 Pistons                                            (Available in Standard and Oversizes:  .50mm = .020")
Complete Ring Set for 8 Pistons  (Available in Standard and Oversizes:  .50mm = .020")
Wrist Pins and Clips
Compression Ratio:          Stock
Bore Diameter:                  93.00 mm
1st Group:                           1.50 mm
2nd Group:                          1.50 mm
Oil Ring:                                3.00 mm
Complete Main and Rod Bearings
Main Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
Rod Bearing Set (Standard or Oversize: .25mm = .010" or .50mm = .020")
New design Rod Bearings without locating tangs. These can replace old style Rod Bearings with locating tangs. Locating tangs are not needed for installation. "Crush" is what holds bearings in place to keep it from spinning. Feel free to consult any well-known bearings manufacture.
Trust Washers
Please specify which bore size you want by leaving us a note during check out.
There are other oversizes available please contact us for special order.
Oil Pump
Water Pump with gasket
Timing Chain Kit
1 Timing Chain (primary - 70 links)
2 Timing Chains (secondary - 106 links)
1 Cam Sprocket (right - 30 teeth)
1 Cam Sprocket (left - 30 teeth)
1 Crank Sprocket (25 teeth)
1 Idler Sprocket (primary - 50 teeth)
1 Idler Sprocket (secondary - 30 teeth)
1 Tensioner (primary)
2 Tensioners (secondary - left and right)
2 Guide Rail (secondary)
2 Guide Rail (tensioner arms)
16 Lifters / Lash Adjusters
Head Bolts Set
20 Long Head Bolts
8 Short Bolts
SKU#:  FSGM30471 with oil pan gasket, PSMI047 - EVE, MB8284, RB8002, TW7214 - EVE, OPMI047, TKMI047L, WP120-4350, JH1525(16), HBGM30400
Additional Information
+ This engine rebuild kit is just what you need to keep your car in good running order. The rebuild kit that you will receive in this kit are high quality pistons that the dealers and rebuilding shops use everyday. So do not settle for lesser quality parts when it comes to engine repair.
+ This rebuild kit is designed for the professional installer. It does not come with any installation instructions. If you do not have a service manual, please consult a professional mechanic prior to installing this kit.
+ Please refer to the listing pictures for an accurate description of the parts included in the kit.
Image Gallery