MOPAR ENGINE BOLTS KIT SMALL BLOCK 273 318 340 360 STAINLESS STEEL HEX SET

Description

SB Mopar 273-360 Stainless Hex Bolt Kit
The image above shows the majority of the parts we ship in our kit.
All washers are polished and then cleaned to remove excess polish material. You will never get a bag of dirty bolts and unpolished or missing washers from Alloyboltz.
THIS IS THE LARGEST KIT ON THE INTERNET FOR THIS ENGINE.
Dress Up Your Small Block Mopar 273-360 V-8 with this awesome
218 piece stainless steel
Hex bolt kit!!
This Kit Fits Vehicle Mopar 273, 318, 340, and 360 Non EFI Engines.
YOU HAVE TO LET US KNOW WITH YOUR PAYMENT IF YOU HAVE A
1964-1969 SB MOPAR
.  THEY USE DIFFERENT BOLTS FOR THE WATERPUMP AND TIMING COVER.  WE SEND FOR THE
1970 & UP
SETUP STANDARD.
DOES NOT WORK WITH THE 318 POLY ENGINES.
We have a kit listed in our Ebay Store for the 318 and 360 Magnum engines.
These are the finest stainless steel bolt kits available. We also offer 304 Stainless Allen kits and grade 8 stainless
ARP
kits for more applications than anyone.
Our kits are also available
Polished
with the stamps and marks still on the heads, but they are shined to a very high shine.  This service is extra.  We also offer our
Show Polishing
.  We remove all stamps and marks and polish the heads to a mirror finish.  The bolts have the appearance of Chrome without the headaches.  Let us know if you want either of these services at the time of ordering and we can price this for you.
This is a complete high quality stainless steel hex bolt kit.  Included is
13
individually packaged and labeled component kits for the following:
Intake Manifold
Timing Cover
Water Pump
Oil Pan
Crank Pulley
Fan Pulley- No Spacer
Thermostat Housing
Distributor
Coil Bracket
Fuel Pump
Valve Covers
Headers- Allen Bolts
Carb Stud Kit
If you are using aftermarket parts on your engine, let us know and we will custom build a kit that fits your combination! Please include a note with your payment listing all modifications you want us to make on your kit.
The carb stud kit is designed to fit
Carter, Edelbrock, Holley or any Throttle Body with a 1/2 inch thick base plate
.  The studs have an internal hex and a 3/16 Allen wrench is used to install them into your intake manifold.  We also include flanged hex nuts and the proper size flat washers.
If you are using a
Quadrajet carb
, just let us know with your payment and we will include a mounting bolt kit for you!
Our washers are custom made in the
USA
to our specifications.
Alloy Boltz
uses larger diameter and thicker flat washers in our kits.
Our flat washe
rs give more support to your engine components.  We also add spli
t lock washers on some of the component kits to make sure things stay tight.
All of our washers are polished to make sure your finished project looks great!
The thin small diameter washers other sellers use offer almost no support and will cause your valve cover or oil pan rails to bend.  If this occurs, the
gasket will
pinch and you will have oil leaks.
We use our extra thick intake washers in this kit.  These washers are thicker and have a smaller center hole to keep the washer centered on the bolt.  Our washers are specially made for us in the
USA
to our specs.
The Alloy Boltz Guarantee.
You will not find a better looking, a better fitting kit, or a more detailed kit anywhere near our price!  If you are not completely satisfied with our kit, we will gladly give you a 100% refund of your purchase price.
Please use Ebay's shipping calculator to find or check your
actual
shipping cost.
Kits going to Alaska, Hawaii, and Puerto Rico will be shipped via USPS Priority.
You can pay us securely with any major credit card through PayPal.